mainalt mainalt mainalt mainalt mainalt mainalt mainalt mainalt mainalt
mainalt mainalt mainalt mainalt
rocket motor hardware and accessories
Pro38 rocket motor hardware is as simple as you can get. With the forward and rear closures included in the reload kit, you only need one piece of hardware - the motor casing. With no expensive aluminum closures to buy, your up-front investment in hardware is significantly reduced!

Manufactured from thin-wall 6061-T6 aluminum tubing with an anodized coating for corrosion protection, Pro38 motor cases are lightweight but strong, capable of holding well over 3000 psi of internal pressure. The forward closure is retained by a formed rim at the head end of the casing. The rear of the casing has precision-machined internal threads.

Pro38 motor casings are available in seven sizes to fit reloads from G through J class. Please refer to the motor specifications page to see which casing is required for each Pro38 reload.

Don't forget that you'll need a delay adjustment tool for your Pro38 reloads, unless you use electronic ejection exclusively. The ProDAT-38 tool allows you to choose from 5 preset delay times with every reload.
Part number:
Description:
P38-1G
Motor casing
P38-2G
Motor casing
P38-3G
Motor casing
P38-4G
Motor casing
P38-5G
Motor casing
P38-6G
Motor casing
P38-SP
Motor casing spacer
P38-DAT
Delay adjustment tool for Pro38 reloads
Please note that the ProDAT-38 and ProDAT-54 only work with Pro38 and Pro54 reloads respectively. Pro38 motor cases are not compatible with any other brand of reload.
mainalt mainalt
mainalt
mainalt
© Copyright 2012 Cesaroni Technology Incorporated. All rights reserved. Home | Products | Downloads | News | Dealers | Gallery
Legal Conditions | Privacy Policy